Special-Order Myri-10G Products
Special-Order Myri-10G Products
|
Please contact sales@myri.com by email
for price quotes for products on this list |
The following Myri-10G products are available, but are in infrequent demand, so are listed separately from the products on the main Myri-10G product list. The products in this list are built to order rather than to forecast, so will typically have a longer delivery lead time than the products on the main Myri-10G product list.
Most of the following Myri-10G products have been replaced with newer and improved products on the main product list, but are still available for replacement if an exact replacement is required. When there is a newer and improved product that is similar in function, it is noted in this list.
Other of the following Myri-10G products are in infrequent demand because they are for special applications.
Follow the links for product specifications.
Software Support for Myri-10G NICs
The current software distributions for Myri-10G NICs work either with the current series of "8B" NICs or with the earlier series of "8A" NICs. See the software listings in the main product list.
Network Interface Cards (NICs)
The first of the "8A" series of Myri-10G PCI Express x8 NICs, based on the Myricom Lanai-Z8E chip, started shipping in early 2006. Starting in October 2008, many of these "8A" NICs have been replaced on the main product list by corresponding "8B" NICs, based on the Lanai-Z8ES chip. The "8B" NICs are lower power than the "8A" NICs, and operate at a 21.5% higher internal clock rate. Also, many of the "8B" NICs are available as RoHS-compliant lead-free (RoHS-6) rather than RoHS-compliant under the server exemption (RoHS-5).
| Description | Software bundle |
Product Code |
| Low-profile PCI-Express add-in card, standard PCI faceplate |
Ethernet | 10G-PCIE-8A-S+E |
| MX | 10G-PCIE-8A-S+MX1 | |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate |
Ethernet | 10G-PCIE-8AL-S+E |
| MX | 10G-PCIE-8AL-S+MX1 | |
| Recommended only for replacements. The 10G-PCIE-8B-S is an improved version of the 10G-PCIE-8A-S NICs above. | ||
| Description | Software bundle |
Product Code |
| Express Module form factor | Ethernet | 10G-PCIE-8AE-R+E |
| MX | 10G-PCIE-8AE-R+MX1 | |
| The 10G-PCIE-8AE-R Express Module NICs are produced for special applications. | ||
| Description | Software bundle |
Product Code |
| Low-profile PCI-Express add-in card, standard PCI faceplate, standard CX4 connector |
Ethernet | 10G-PCIE-8A-C+E |
| MX | 10G-PCIE-8A-C+MX1 | |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate, standard CX4 connector |
Ethernet | 10G-PCIE-8AL-C+E |
| MX | 10G-PCIE-8AL-C+MX1 | |
| Recommended only for replacements. The 10G-PCIE-8B-C is an improved version of the 10G-PCIE-8A-C NICs above. | ||
| Low-profile PCI-Express add-in card, standard PCI faceplate, jackscrew type CX4 connector |
Ethernet | 10G-PCIE-8A-CJ+E |
| MX | 10G-PCIE-8A-CJ+MX1 | |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate, jackscrew type CX4 connector |
Ethernet | 10G-PCIE-8AL-CJ+E |
| MX | 10G-PCIE-8AL-CJ+MX1 | |
| These 10G-PCIE-8A-CJ NICs are produced for a special application. | ||
| Description | Software bundle |
Product Code |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate |
Ethernet | 10G-PCIE-8BL-2C+E |
| MX | 10G-PCIE-8BL-2C+MX1 | |
| This low-profile (half-height) PCI Express add-in card is not fully compliant with the PCI Express Card Electromechanical Specifications. The lower CX4 connector intrudes into a "keep-out area" of the circuit board and may interfere mechanically with motherboard components in some hosts. Thus, this NIC is a special-order product that should be used only for applications in which a low-profile card is required, and in which it has been determined that there is no mechanical interference in the host. If a low-profile card is not required, the standard-height 10G-PCIE-8B-2C NIC with a standard PCI faceplate should be used. | ||
| Description | Software bundle |
Product Code |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate |
Ethernet | 10G-PCIE2-8B2L-2C+E |
| MX | 10G-PCIE2-8B2L-2C+MX1 | |
| This low-profile (half-height) PCI Express add-in card is not fully compliant with the PCI Express Card Electromechanical Specifications. The lower CX4 connector intrudes into a "keep-out area" of the circuit board and may interfere mechanically with motherboard components in some hosts. Thus, this NIC is a special-order product that should be used only for applications in which a low-profile card is required, and in which it has been determined that there is no mechanical interference in the host. If a low-profile card is not required, the standard-height 10G-PCIE2-8B2-2C NIC with a standard PCI faceplate should be used. | ||
| Description | Software bundle |
Product Code |
| Low-profile PCI-Express add-in card, standard PCI faceplate. |
Ethernet | 10G-PCIE-8A-QP+E |
| MX | 10G-PCIE-8A-QP+MX1 | |
| Low-profile PCI-Express add-in card, low-profile PCI faceplate. |
Ethernet | 10G-PCIE-8AL-QP+E |
| MX | 10G-PCIE-8AL-QP+MX1 | |
| Recommended only for replacements. The 10G-PCIE-8B-QP is an improved version of the 10G-PCIE-8A-QP NICs above. | ||
| Description | Software bundle |
Product Code |
| One-port HSEC for the IBM BladeCenter H | Ethernet | 10G-PCIE-8A-I+E |
| MX | 10G-PCIE-8A-I+MX1 | |
| Recommended only for replacements. The 10G-PCIE-8B-2I and 10G-PCIE-8B2-4I HSECs are improved versions of the 10G-PCIE-8A-I HSEC above. | ||
Components for Myri-10G Modular Switches
| Description | Product Code |
| 16 front-panel Myrinet-protocol 10GBase-CX4 ports on mini-CX4 connectors (16 XAUI links to the backplane) | 10G-SW32LC-16M |
| 10G-THRU-16M | |
| The use of CX4 cabling for Myrinet-protocol "-M" ports has largely been displaced by the use of QSFP-terminated copper or EOE cables between "-QP" ports. The 10G-SW32LC-16QP and 10G-THRU-16QP line cards have the same functions as those above, and are recommended for new installations. | |
| 16 front-panel Ethernet-protocol 10GBase-CX4 ports on mini-CX4 connectors (16 XAUI links to the backplane) | 10G-SW32LC-16EM |
|
The 10G-SW32LC-16EM line card is in low demand because of the preference for serial-fiber 10GBase-SR and SFP+-terminated Direct Attach links supported by the 10G-SW32LC-16ES line card.
|
|
Myri-10G Cables
| Description | Product Codes |
| 1m, 30AWG | 10G-CX4CXM-1M |
| 2m, 30AWG | 10G-CX4CXM-2M |
| 3m, 30AWG | 10G-CX4CXM-3M |
| 5m, 30AWG | 10G-CX4CXM-5M |
| 7m, 28AWG | 10G-CX4CXM-7M |
| 10m, 26AWG | 10G-CX4CXM-10M |
| 15m, 26AWG | 10G-CX4CXM-15M |
|
These cables are used typically for connections between "-C" NICs and "-M" switch ports. These are industry-standard cables that may alternatively be purchased from other sources. The 10GBase-CX4 cables supplied by Myricom have a light blue jacket.
|
|
| Description | Product Codes |
| 1m, 30AWG | 10G-CXM-1M |
| 2m, 30AWG | 10G-CXM-2M |
| 3m, 30AWG | 10G-CXM-3M |
| 5m, 30AWG | 10G-CXM-5M |
| 7m, 28AWG | 10G-CXM-7M |
| 10m, 26AWG | 10G-CXM-10M |
| 15m, 26AWG | 10G-CXM-15M |
|
These cables are used typically for connections between "-M" switch ports. These are industry-standard cables that may alternatively be purchased from other sources. The 10GBase-CX4 cables supplied by Myricom have a light blue jacket.
|
|
Regulatory Information
See this web page of regulatory information on Myri-10G products. All products listed above are either RoHS-compliant under the server exemption, or RoHS-compliant leadfree (RoHS-6).
Standard Sales Terms
Prices are subject to change without notice.
Shipping: FOB origin.
US Terms: Net 30 days on approved credit.
Export Terms: Prepayment is normally required.
Standard Warranty: 3-year repair or replacement warranty, excluding physical damage or abuse.
Extended Warranty: The warranty on any product can be extended at the time of purchase to five years at an additional cost of 4% of the invoice amount (the price after discounts, if any). For quotes, please indicate in the comments the items on which you would like to extend the warranty from 3 years to 5 years.
Last updated: 17 July 2009